Hioki 3129-10 Phase Detector
- Magnetic Adapter, Fixable to Distribution Boards
- CATIV 600 V/CATIII 1000 V Safe
- No Metallic Exposure Ensures Absolutely Safety to the Operator
- Wide Clips Compatible to Thick Cables of 7 mm (0.28 in) to 40 mm (1.57 in) in Diameter
Basic Specifications
Measurement Function:
Phase Detection (Positive, Negative), Live Wire Check (R-S/S-T only)
Voltage Detection Method:
Electrostatic Induction Method
Voltage Range:
70 to 1000 VAC (50/60 Hz)(Sine Wave, Continuous Input)
Clamp Diameter:
7 mm (0.28 in) to 40 mm(1.57 in) of Insulated Wiring
Display:
Phase Detection : Positive ; 4 LEDs Lit in Clockwise Order and 3 Short Beeps
Negative ; 4 LEDs Lit in Counterclockwise Order and One Continuous Beep
Live Wire Check : R-S and S-T Lamps will Light if Voltage Between Wires are within Voltage Range
Battery Check Function:
ON Lamp Blinks to Indicate Battery Low Status When Instrument is Turned on
Auto Power Off:
Auto Shut off if no Activity is Detected After Power is Turned ON for 15 Minutes
Power Supply:
Two AA Size Batteries X 2 (Rated Voltage: DC 3.0 V; Maximum Rated Ower: 300 mVA)
Continuous Use:
approx.70 Hours (standby)
Dimensions, Mass:
70 mm (2.76 in) W X 75 mm (2.95 in) H X 30 mm (1.18 in) D, 240g (8.5 oz), Cord Length : 0.7 m(27.56 in)
Accessories:
Carrying Case(1), Strap(1), R6P Manganese Batteries(2), Spiral Tube(1)
