Hioki 3129 Phase Detector
- Magnetic Adapter, Fixable to Distribution Boards
- Top “Primary Supply Level” Safety Class Rating for Phase Detectors
- CAT III 600V Design Meets CE Mark Qualifications.
- Provides Both Visual and Audible Phase Detection
- Detects Phase on Insulated Conductors
- Auto Power-Off Function Prevents Inadvertent Battery Discharge
Basic Specifications
Measurement Function:
Phase Detection (Positive, Negative),Live Wire Check (R-S/S-T only)
Voltage Detection Method:
Electrostatic Induction Method
Voltage Range:
70 to 600 V AC (50/60 Hz)(Sine Wave,Continuous Input)
Clamp Diameter:
2.4 mm (0.09 in) to 17 mm (0.67 in) of Insulated Wiring
Display:
Phase Detection: Positive ; 4 LEDs Lit in Clockwise Order and 3 Short Beeps
Negative; 4 LEDs Lit in Counterclockwise Order and One Continuous Beep
Live Wire Check: R-S and S-T Lamps will Light if Voltage Between Wires are Within Voltage Range
Battery Check Function:
ON Lamp Blinks to Indicate Battery Low Status When Instrument is Turned on
Auto Power Off:
Auto Shut off if no Activity is Detected After Power is Turned ON for 15 Minutes
Power Supply:
Two AA Size Batteries × 2 (Rated Voltage: DC 3.0 V; Maximum Rated Power: 300 mVA)
Continuous Use:
approx.70 Hours (Standby)
Dimensions, Mass:
70 mm (2.76 in) W X 75 mm (2.95 in) H X 30 mm (1.18 in) D, 200 g (7.1 oz), Cord length : 0.7 m (27.56 in)
Accessories:
Carrying Case(1), Strap(1), R6P Manganese Batteries(2), Spiral Tube(1)
