Hioki 3258 Safety Hitester
- Non-Metallic Contact for Optimum Safety
- Capture the Voltage Value of Covered Electric Wires
- Also Ideal for Metallic Busbars and Terminals
- Optimized for 400 V AC Circuits
Basic Specifications
Measurement Object:
Covered Electric Conductors (Minimum 100 sq mm), Metallic Terminals Note: Cannot Measure Shielded Electric Wires
AC Voltage 40 to 66 Hz:
30.0 V to 420.0 V, 380 V to 600 V, 2 Ranges (Basic Accuracy: ±1.5 % rdg. ±5 dgt. /True RMS Rectified, Band Width 40 Hz to 400 Hz at 420.0 V Range)
Crest Factor:
1.8 (only Sine Wave at 600 V Range)
Max. Rated Voltage to Earth:
600 V AC rms Functions Data Hold Function, Auto-Power Save, Low Battery Alarm
Display:
Digital LCD, Max. 4200 Digit, (Zero Suppress at 10 Digits or Less)
Sampling Rate:
1.67 Times/sec (Approx. 600 msec Period), Response Time 2.4 sec or Less
Power Consumption:
AA Alkaline (LR6) Battery X 6, Continuous use: 14 hr (Power ON, No Measurement), or 1-Minute Measurements for 1000 Times, or 5-Minute Measurements for 200 Times
Dimensions, Mass:
51 mm (2.01 in) W X 275 mm (10.83 in) H X 37.5 mm (1.48 in) D (One Probe), 670 g (23.6 oz)
Supplied Accessories:
Operation Manual X 1, Carrying Case X 1, AA Alkaline Battery (LR6) X 6
